Phone: 631-242-4249 | Toll-Free: 888-686-3454

NANOCOLOR Standard Tests

High sensitivity photometric water analysis

High sensitivity for photometric water analysis
NANOCOLOR standard tests are convenient reagent kits for photometric analysis. With ready-to-use reagents up to 500 determinations are possible with only one test kit, resulting in low costs per determination for the user. Even very low limits can be evaluated precisely, due to high sample volumes and the measurement in 50 mm cuvettes. An enhancement of selectivity is possible for various parameters by extraction, where potentially interfering substances remain in the aqueous phase. The colored complex with the substance of interest is extracted with an organic solvent from the aqueous phase and is then analyzed within the organic phase.
Rugged box with reagents for 100 tests.

1. Fill 20 mL sample into 25 mL flask

2. Add reagents

3. Fill up to 25 mL with dist. water and mix

4. After reaction time fill into cuvette

5. Measure

Our Nanocolor standard tests

Parameters

2 rugged boxes with reagents for 500 tests.
REF: 918142
Measuring range: Fluoride - 0.05-2.00 mg/L F-
$128.00
Add to cart
Rugged box with reagents for 250 tests.
REF: 91844
Measuring range: Hydrazine - 0.002-1.50 mg/L N2H4
$98.30
Add to cart
Rugged box with reagents for 250 tests.
REF: 91836
Measuring range: Iron - 0.01-15.0 mg/L Fe
$166.00
Add to cart
Rugged box with reagents for 250 tests.
REF: 918128
Measuring range: Iron - 0.005-5.00 mg/L Fe
$177.00
Add to cart
2 rugged boxes with reagents for 25 tests.
REF: 918101
Measuring range: Lead - 0.005-1.00 mg/L Pb2+
$212.00
Add to cart
Rugged box with reagents for 250 tests.
REF: 91860
Measuring range: Manganese - 0.01-10.0 mg/L Mn
$262.00
Add to cart